if you have Many Managed Systems connected to HMC and you need to list ALL LPARs that you have on a table view like the following output:

-----------------------------
Server Name : Server-****-***-***
------------
LPAR Name          LPAR Number   IP Address
TEST1                             5                       10.10.10.1
TEST2                            4                       10.10.10.2
TEST2                             3                      10.10.10.3
TEST4                            2                       10.10.10.4
LPAR                              1                       10.10.10.5
VIO                                  6                      10.10.10.6

just run the following commands on HMC :

for sys in $(lssyscfg -r sys -F name)
do
echo "-----------------------------"
echo "Server Name : $sys"
echo "------------"
printf "LPAR Name %-8s LPAR Number %-1s IP Address"
for lpar in $(lssyscfg -r lpar -m $sys -F name,lpar_id,rmc_ipaddr)
do
echo ""
NAME=`echo $lpar | cut -f1 -d,`
ID=`echo $lpar | cut -f2 -d,`
IP=`echo $lpar | cut -f3 -d,`
if [ "$IP" == "" ];
then
IP="NO IP";
fi
printf "%-22s" $NAME && printf "%-10s" $ID && printf "%-1s $IP"
done
echo
done

Wednesday, July 17th, 201312:38 pmThis entry was posted on at and is filed under HMC. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.